Satisfied customers...

Excellent product knowledge, very helpful and friendly. This was a second trade and will not be the last. The products work very well, thanks. 
Peter, Huntly

See more testimonials

DEK2024 - 2hp Electric Air Compressor

DEK Air Compressor DEK2024

 

 

 

 

 

 

 

 

DEK2024 - Electric 2hp Belt Driven Piston Air Compressor

The DEK2024 is a highly portable, conveniently light weight, compact and quiet machine.  Oil-lubricated heavy duty cast iron cylinder, single stage compression cycle with automatic pressure activated start/stop. Its strong construction makes it a reliable, durable and long lasting tool ideal for the Handyman's shed, the farm or work vehicle.

Technical Features:
 
Motor: DEK copper wound 2hp 1.5kw 240V / 50Hz single phase
Type: Alloy Piston
Drive: Belt driven
Storage Tank: 24L
Pressure: .8Mpa (120psi)
Delivery: 150L/pm
One outlet
Pressure Gauge + Pressure Regulator Gauge
Relief Valve
Powder Coated
Air release valve on underside of the tank to drain any moisture build up
Full guard to enclose pulleys and belts for added safety 
Fully serviced and ready to go
WARRANTY 12 MONTHS 

$395

Including GST

Shipping details

Freight to Mainfreight depots
North Island, NZ $25
South Island, NZ $50

For more information  contact@dek.co.nz


DEK3050 - 3hp Electric Air Compressor

DEK Air Compressor DEK2024

 

 

 

 

 

 

 

 

 

 

DEK3050 - Electric 3hp Belt Driven Piston Air Compressor

The DEK3050 is a highly portable,compact and quiet machine.  Oil-lubricated heavy duty cast iron cylinder, single stage compression cycle with automatic pressure activated start/stop. It's strong construction makes it a reliable, durable and long lasting tool ideal for the Handyman's shed, the farm or work vehicle.
 
Technical Features:

Motor: DEK 3hp copper wound 2.2kw 240V / 50Hz single phase
Type: Alloy Piston
Drive: Belt driven
Storage Tank: 50L
Pressure: .8Mpa (120psi)
Delivery: 11.7 cfm

 
Three outlets
Pressure Gauge
Relief Valve
Powder Coated
Air release valve on underside of the tank to drain any moisture build up
Full guard to enclose pulleys and belt for added safety
360 degree swivel castor wheel on the front for increased stability

Fully serviced and ready to go

WARRANTY 12 MONTHS 

$595

Including GST

Shipping details

Freight to Mainfreight depots
North Island, NZ $60
South Island, NZ $80

For more information  contact@dek.co.nz

 


DEK3095 - 3hp Electric Air Compressor

DEK Air Compressor DEK3095

 

 

 

 

 

 

 

 

 

 

 

 

DEK3095 - Electric 3hp Belt Driven Piston Air Compressor

The DEK3095 is a portable and compact machine. Super quiet with an oil-lubricated v-twin heavy duty cast iron cylinder, 2 stage compression cycle with automatic pressure activated start/stop.This semi-commercial sized compressor would make a great addition to the serious handyman's shed or mechanics workshop for applications such as inflating toys, beds, tyres, using rattle guns, air tools etc.

Its strong construction makes it a reliable, durable and long lasting tool

Technical Features:

Motor: DEK 3hp 2.2kw 240V / 50Hz single phase copper wound for extra long life
Type: Cast Iron twin cyl and Alloy Pistons
V twin for better cooling
Drive: Belt driven
Storage Tank: 95L Storage Tank
Pressure: 8bar (120psi)
Pump delivery: 14.7 CFM
60 psi delivery  16cfm

Two outlets
Pressure Gauge
Relief Valve
Powder Coated
Air release valve on underside of the tank to drain any moisture build up
Full guard to enclose pulleys and belts for added safety
 
Tested, Run and ready to use

For more Compressor options please view our other listings

Oiled, started and tested in our workshop prior to delivery.
We carry spare parts and do servicing in our warehouse/workshop in Hamilton.

DEK products have been sold and distributed by Cross Country for 10 years on the New Zealand market.

WARRANTY 12 MONTHS

$895

Including GST

Shipping details

Freight to Mainfreight depots
North Island, NZ $80
South Island, NZ $120

For more information contact@dek.co.nz


DEK 7003PH - 7.5hp Three Phase Air Compressor

DEK Air Compressor DEK7003PH

 

 

 

 

 

 

 

 

 

 

 

 

DEK 7003PH Three Phase Air Compressor mounted with a DEK 7.5hp Motor with copper windings for extra long life.

The DEK 7003PH uses the DEK 7.5hp Electric Motor to power the three heavy duty cast iron, oil-lubricated cylinders in a two stage compression cycle.

Its strong construction and quality finish makes it a reliable, durable and long lasting tool ideal for the shed, farm or workshop.

TECHNICAL FEATURES:
Type: Cast Iron Cyl and Alloy Pistons
Drive: Belt driven
Storage Tank: 170L
Pressure: 0.8Mpa (161psi)
Pump delivery: 23 CFM
115 psi delivery 28cfm
Three outlets
Pressure Gauge
Powder Coated
L=1350 x W=520 x H=1020mm

MOTOR:
DEK 7.5hp Electric Motor (2900 RPM)
50Hz three phase copper wound, for extra long life
12A
415V

ISO 9002

Air release valve on underside of the tank to drain any moisture build up

Full guard to enclose pulleys and belts for added safety

Please Note: As this is a 3 PHASE Compressor it will need to be wired up by a registered electrician. No plug or lead is supplied with the compressor. 

All DEK products use quality NSK/NTN bearings

Tested, Run and ready to use

Oiled, started and tested in our workshop prior to delivery.
We carry spare parts and do servicing in our warehouse/workshop in Hamilton.

DEK products have been sold and distributed by Cross Country for 10 years on the New Zealand market.

WARRANTY 12 MONTHS

$1,985

Including GST

Freight: POA
 

For more information contact@dek.co.nz


DEK 1000QUAD - 300L 3 Phase

DEK Air Compressor DEK7003PH

 

 

 

 

 

 

 

 

 

 

DEK1000 QUAD - 37CFM - 300L - 3 Phase Electric 

 
The DEK1000 Quad is powered by a 7.5KW 3 Phase Electric motor. The Compressor delivers a huge 37 cfm from the heavy duty cast iron, oil-lubricated cylinders in a two stage compression cycle with automatic pressure activated start/stop air release. 
 
Its strong construction and quality finish makes it a reliable, durable and long lasting tool ideal for the Shed, Farm or Workshop. Ideal tyre shop compressor 
 
Features: 
 
Type: Piston 
Drive: Belt driven 
Storage Tank: 300L 
Pressure: up to 180psi 
Pump delivery: 37 Cubic Feet Per Minute / 1050 Litres Per Minute 
Large pulley & low 1500RPM for durability 
Two outlets 
Pressure Gauge 
Relief Valve 
Powder Coated 
Air release valve on underside of the tank to drain any moisture build up 
Full guard to enclose pulleys and belts for added safety 
 
Motor:
 
3 Phase 7.5kw motor 
2900RPM 
 
 
Dimensions complete unit: 1590mm long x 530mm wide x 1120mm Tall, steel wheels 
 
All DEK products use quality NSK or NTN bearings 
 
Please Note: As this is a 3 PHASE Compressor it will need to be wired up by a registered electrician. No plug or lead is supplied with the compressor. 
 
12 MONTHS WARRANTY 
 
Oiled, started and tested in our workshop prior to delivery. We carry spare parts and do servicing in our warehouse/workshop in Hamilton. 
 
We carry spare parts and do servicing in our warehouse/workshop in Hamilton. 
 
DEK, Turf Mate and Seaflo products have been sold and distributed by us for 10 years on the New Zealand market. 

WARRANTY 12 MONTHS
 

$2,350

Including GST

Freight: POA
 

For more information contact@dek.co.nz


 

DEK 900QUAD - 120L 3 Phase

DEK 900QUAD Air Compressor

DEK900 QUAD - 37CFM - 120L - 3 Phase Electric 
 
CURRENTLY OUT OF STOCK!
 
The DEK900 Quad is powered by a 7.5KW 3 Phase Electric motor. The Compressor delivers a huge 37 cfm from the heavy duty cast iron, oil-lubricated cylinders in a two stage compression cycle with automatic pressure activated start/stop air release. 
 
Its strong construction and quality finish makes it a reliable, durable and long lasting tool ideal for the Shed, Farm or Workshop. Ideal tyre shop compressor 
 
Features: 
 
Type: Piston 
Drive: Belt driven 
Storage Tank: 120L 
Pressure: up to 180psi 
Pump delivery: 37 Cubic Feet Per Minute / 1050 Litres Per Minute 
Large pulley & low 1500RPM for durability 
Two outlets 
Pressure Gauge 
Relief Valve 
Powder Coated 
Air release valve on underside of the tank to drain any moisture build up 
Full guard to enclose pulleys and belts for added safety 
3 Phase 7.5kw motor 2900 RPM 
 
Dimensions complete unit: 1590mm long x 530mm wide x 1120mm Tall, steel wheels 
 
All DEK products use quality NSK or NTN bearings 
 
 
Please Note: As this is a 3 PHASE Compressor it will need to be wired up by a registered electrician. No plug or lead is supplied with the compressor. 
 

WARRANTY 12 MONTHS
 

$2,150

Including GST

Freight: POA
 

For more information contact@dek.co.nz