Satisfied customers...

Excellent product knowledge, very helpful and friendly. This was a second trade and will not be the last. The products work very well, thanks. 
Peter, Huntly

See more testimonials

Circulation Pump - Hot/Cold Water 3 Speed - 120W OUT OF STOCK!

Circulation Pump - Hot/Cold Water 3 Speed - 120W
 
Finally, you don't need to buy a new Hot water cylinder to have a good water pressure or have a proper shower again! 
 
Now you can boost your hot or cold water pressure without the expense of a new Hot water cylinder.This easy to install pump provides additional pressure to showers, taps and similar outlet points for domestic water when installed after the hot water cylinder. Just Plumb it in and plug it in (std 3 pin plug). 
 
3 Speed: 
 
• Power: 120W 220V 50Hz 
• Model: LRS15/9 
• Maximum capacity: 65L/min 
• Maximum head lift: 9m 
• Input & output diameter: 25mm (1") 
• Fluid temperature range: 0°C to 110°C 
• Corrosion free and high quality pump casing 
• Instruction manual included 
• Not automatic on/off with pressure (separate switch required) 
 
Please note as they have a glass bearing carrier they can NOT be run with out water passing through as it will damage the pump. 
 
We carry spare parts and do servicing in our warehouse/workshop in Hamilton. 
 
12 Months Warranty
 
$89.00 Incl GST 
 
Nationwide Courier $6
 
For more information  contact@dek.co.nz
 

Circulation Pump - Hot/Cold Water 3 Speed - 165W OUT OF STOCK!

Circulation Pump - Hot/Cold Water 3 Speed - 165W
 
Finally, you don't need to buy a new Hot water cylinder to have a good water pressure or have a proper shower again! 
 
Now you can boost your hot or cold water pressure without the expense of a new Hot water cylinder.This easy to install pump provides additional pressure to showers, taps and similar outlet points for domestic water when installed after the hot water cylinder. Just Plumb it in and plug it in (std 3 pin plug). 
 
3 Speed: 
 
• Power: 165/120/80W 220V 50Hz 
• Model: LRS-165 
• Maximum capacity: 80L/min 
• Maximum head lift: 8,6,4m 
• Input & output diameter: 25mm (1") 
• Fluid temperature range: 0°C to 110°C 
• Corrosion free and high quality pump casing 
• Instruction manual included 
• Not automatic on/off with pressure (separate switch required) 
 
Please note as they have a glass bearing carrier they can NOT be run with out water passing through as it will damage the pump. 
 
We carry spare parts and do servicing in our warehouse/workshop in Hamilton. 
12 Months Warranty
 
$99.00 Incl GST 
 
Nationwide Courier $6
 
For more information  contact@dek.co.nz
 

Circulation Pump - Hot/Cold Water 3 Speed - 200W OUT OF STOCK!

Circulation Pump - Hot/Cold Water 3 Speed - 200W
 
Finally, you don't need to buy a new Hot water cylinder to have a good water pressure or have a proper shower again! 
 
Now you can boost your hot or cold water pressure without the expense of a new Hot water cylinder.This easy to install pump provides additional pressure to showers, taps and similar outlet points for domestic water when installed after the hot water cylinder. Just Plumb it in and plug it in (std 3 pin plug). 
 
3 Speed: 
 
• Power: 200/180/115W 220V 50Hz 
• Model: LRS40/9 
• Maximum capacity: 95L/min 
• Maximum head lift: 9m 
• Input & output diameter: 25mm (1") 
• Fluid temperature range: 0°C to 110°C 
• Corrosion free and high quality pump casing 
• Instruction manual included 
• Not automatic on/off with pressure (separate switch required) 
 
Please note as they have a glass bearing carrier they can NOT be run with out water passing through as it will damage the pump. 
 
We carry spare parts and do servicing in our warehouse/workshop in Hamilton. 
12 Months Warranty
 
$109.00 Incl GST 
 
Nationwide Courier $6
 
For more information  contact@dek.co.nz

Circulation Pump - Hot/Cold Water 3 Speed - 305W OUT OF STOCK!

Circulation Pump - Hot/Cold Water 3 Speed - 305W
 
Finally, you don't need to buy a new Hot water cylinder to have a good water pressure or have a proper shower again! 
 
Now you can boost your hot or cold water pressure without the expense of a new Hot water cylinder.This easy to install pump provides additional pressure to showers, taps and similar outlet points for domestic water when installed after the hot water cylinder. Just Plumb it in and plug it in (std 3 pin plug). 
 
3 Speed: 
 
• Power: 305/260/200W 220V 50Hz 
• Model: LRS25/14 
• Maximum capacity: 95L/min 
• Maximum head lift: 14m 
• Input & output diameter: 25mm (1") 
• Fluid temperature range: 0°C to 100°C 
• Corrosion free and high quality pump casing 
• Instruction manual included 
• Not automatic on/off with pressure (separate switch required) 
 
Please note as they have a glass bearing carrier they can NOT be run with out water passing through as it will damage the pump. 
 
We carry spare parts and do servicing in our warehouse/workshop in Hamilton. 
12 Months Warranty
 
$119.00 Incl GST 
 
Nationwide Courier $6
 
For more information  contact@dek.co.nz